Please give samples 3-5 business days to process. Thank you!

 

OFFERING A 6-IN-1 SOLUTION TO RESIDENTIAL AND COMMERCIAL BUILDING INDUSTRIES.

The Tstudβ„’ is a thermally broken, insulated wall stud assembly for use in exterior walls and in party walls.

STRUCTURAL

THERMAL

WIND

SOUND

FIRE

Mold, ROt & Termite

THE TSTUDβ„’ IS A GAME CHANGING TECHNOLOGY.

The Tstudβ„’ is a new engineered building product that uses two lumber members, an internal truss system, and a frothed-in-place closed-cell foam providing a 99% complete thermal break through the wall assembly. With just ONE product, the Tstudβ„’ raises the bar on 5 major construction concerns: thermal breaks, structural strength, wind loads, sound transmission and fire/life safety.

Tstudβ„’ solves the number one nemesis of the Construction Industry:
how to β€œcost effectively” stop the transfer of outdoor climatic heat or cold from affecting the interior of a structures’ ambient room temperature.

Working with certified testing authorities, energy modelers and early customers, Tstudβ„’ has developed products with outstanding thermal efficiencies.

 
 

sustainable, greener, stronger!

 
housedrawingnologo.jpg

*Roof and Floor Tstud’s are in the Research & Development phase.

 

THE TSTUDβ„’ ISN'T COMPLICATED.

It's quite easy to replace traditional 2x lumber with the Tstudβ„’.
With little to no additional training.

Name Your Wall Assembly.jpg
 
 
hot50.jpg
 
 

Use the Tstudβ„’ in a variety of ways!

 
Multitaskweb.png
 

KEY BENEFITS

 
iconsgreen-03.png

STRUCTURAL

In straight down vertical testing: three times stronger than #2 2x6's. Four times stronger than 2x4's.

Because of how the Tstudβ„’ is constructed, it is also a mini header when used as a top plate. Only one Tstudβ„’ is required when used as a top plate compared to two 2x6’s or 2x4’s in traditional framing which has been done for centuries. 

The Tstudβ„’ is stronger than LSL (laminated strand lumber) or LVL (laminated veneer lumber) stud sized lumber in most applications up to 16’-0” in height depending on wind load conditions. See the wind load tables in the technical evaluation report (TER1603-06 and compare to LSL and LVL studs without lateral bracing). The Tstudβ„’ is able to be used in walls up to 16’ in height.  Keep Reading β†’

THERMAL

The tstudβ„’ wall assembly provides a complete* thermal break through the wall – hot or cold.

*99.23% complete thermal break

A built-in foam core gives the Tstudβ„’ three times the insulation of a conventional wood stud.

The Tstudβ„’ is the same depth as a 2x6 but offers an impressive initial R-Value of 20 and has a 99.23% complete thermal break through the stud.  Meaning that there isn't a need for continuous rigid insulation to meet and exceed the 2015 energy code in all of the climate zones in North America.

By using the thermally broken Tstudβ„’: Structural Insulated Framing System, a reduction of 4-7 points on the HERS numbering system is garnered.

Utility companies have confirmed up to $4000 rebate is available in Minnesota and most other states.
Please check with your local utility company for confirmation.

By improving the thermal break in the exterior wall with an initial R Value of 20,
24% of the home (framing members) are given a 290% improvement in energy efficiency. Keep Reading β†’

iconsgreen-01.png
iconsgreen-05.png

WIND

Hurricane and seismic testing has passed at 16” and 24” on center spacing. Keep Reading β†’

SOUND

The Tstudβ„’ foam core minimizes the sound vibrations through the wall equal to a +6 in sound transmission ratings.

Providing an impressive amount of sound proofing, equivalent to using resilient channel to both sides of a wall.

It can cost thousands to add resilient channel to both sides of wall to reduce sound vibration. The same sound transmission rating is free with a Tstudβ„’ wall. Keep Reading β†’

iconsgreen-04.png
iconsgreen-02.png

FIRE

90% of the Tstudβ„’ remained intact after a 10-minute burn at 3500 degrees.

*soon to be code compliant!

 Keep Reading β†’

MOLD, ROT, & TERMITE RESISTANT

More information coming soon! 

The Tstudβ„’ will offer protection from the harmful effects of mold, rot (fungal decay) and wood ingesting insects including formosan termites. The Tstudβ„’ is made to be used on concrete and in infestation areas of North America. 
Keep Reading β†’

iconsgreen-06.png

SAVINGS FOR HOMEOWNERS!

Greater energy efficiency means potentially smaller furnaces and air conditioning equipment.

By replacing traditional framing with Tstudβ„’ Structural Insulated Framing Members, homeowners and owners of buildings can rest assured that all of the framing members are up to 290% more energy efficient. This benefit lasts for the life of the structure.  

Have your builder ask about the Tstudβ„’ today!

 
Burn Test: Tstudβ„’ (left) vs a 2x6 (right).